The status says Sent, but nothing happened
- The Print Agent is offline — check it is running and connected (its Status screen).
- Wrong network — the agent and the relay must be on the same local network. The agent refuses any address that is not local, and records the refusal in its log.
- Wrong address — the relay’s address changed after a power cut. Give it a fixed address in the router and update the device.
- Wrong channel — try the other channel numbers with the test buttons.
- Wrong type — a newer Shelly set as Gen 1 (or the reverse) ignores the command.
- Login — the device has a password set that is not entered in CloudPos, or the reverse.
Skipped: their device has no Print Agent
Edit the device and choose Runs On (Print Agent).
You Don’t Have Permission To Control The Lights
The signed-in employee needs the Light Control permission, manager access or Back Office Config. See The Lights panel at the POS.
The bulb does not match the room
The bulb shows what CloudPos last sent. A wall switch, a power cut or the relay’s own button are not seen. Tap On or Off to bring them back in step.
A light came on during Last Call
Every flash ends with the light on, including lights that were off. Untick Last Call on lights that are normally off at closing time.
A table light stayed on
- Another timer on the same order is still running.
- A Table Light Off Delay is set: the light turns off when it runs out.
- The Print Agent restarted during the delay: switch the light off from the Lights panel.
The Lights button is missing on the POS
It only shows for managers and for jobs with the Light Control permission.
The designer shows no Light setting
- Light only appears on timed shapes (pool tables, lanes, rooms…).
- The store has no lights yet, or the signed-in employee may not list them (manager, Light Control or Back Office Config).