100%
Hardware & Printing › Lighting and Last Call

Choosing relays and wiring safely

Which relays work with CloudPos, what to ask your electrician, and the network they need.

What works

KindExamplesChoose in CloudPos
Wi-Fi relays (newer)Shelly Plus, Pro and laterShelly (Plus / Pro)
Wi-Fi relays (older)Shelly 1, 2.5 and similar first-generation modelsShelly (Gen 1)
Relays or plugs running TasmotaMany low-cost relays and plugs, flashed with TasmotaTasmota
Network relay boards and anything switched by a web addressMulti-channel relay boards, most smart switches with a local web APICustom (URLs)

Multi-channel devices (a 4-channel Shelly Pro, an 8-relay board) are one device with several channels: each channel is one light in CloudPos.

What the device must do

  • Be switched by a plain web address on the local network (for Custom: one address for on, one for off).
  • Sit on the same network as the store’s Print Agent, with a local address such as 192.168.1.50. A fixed address (a DHCP reservation in the router) keeps it from changing.
  • If it has a login, CloudPos can send it — see Adding relay devices.
Devices that can only be switched through their maker’s cloud app, or that need a different kind of request than a plain web address, are not supported yet.

Wiring

  • Anything on mains power is a job for a licensed electrician. Show them which light each channel should switch and label the relays.
  • Leave each light’s normal wall switch in a sensible state: if someone switches a circuit off at the wall, CloudPos cannot turn it on.
  • Keep emergency, exit and safety lighting off the relays entirely.
Last Call turns the chosen lights off for a moment. Put only lights on it that are safe to turn off in a full room.
Before buying for a whole room, test one relay on the bench: add it, add a light, and use the On / Off / Flash test buttons. See What CloudPos sends, and testing on the bench.